Since CaDA and HUMVEE signed a strategic cooperation, two off-road vehicles have been released: C61027 1:12 authorized HUMVEE off-road vehicle and C55022 1:24 authorized HUMVEE off-road vehicle, which have been recognized by many friends and military fans. In September, CaDA released the 1:8 CaDA C61036 HUMVEE military version, a tough off-road vehicle with more than 3,900 technological blocks, like a blockbuster.

Packaging and contents

The package is packaged with a heaven and earth cover, and the cover is very simple. From the photos, you can also see that the main picture of the car is printed with a strong three-dimensional effect. The military off-road vehicle looks very tough with a dark background.

The bottom of the box shows the details of some products as usual. In addition to the openable hood and trunk, this HUMVEE off-road vehicle is also equipped with an electric winch, a linked 8-cylinder engine, and so on. The power pack includes: M type motor Pro*1, servo motor Pro*1, L power motor Pro*3, 2.4G lithium battery box*1, LED light group*1, extension cable*1, 2.4G remote control, additional Plus purchase.

After opening the upper cover, the 5 sub-package inner boxes are combined into a silver Hummer side view, which is full of technological sense.

There are numbers on the inner box. In addition to No. 00, the inner box contains 4 sets of tires and various common pins, 01-04 is a step-by-step sub-packing of parts.

The instructions, stickers, and supplementary guide cards are well protected by plastic tape. It is very intimate that the manual is divided into 5, each of which is not very thick. Compared with the thick manual, it is much more convenient to read when assembling.

CaDA’s manual is very meticulous. The scale of the parts and some details that are prone to errors in assembly are marked out. However, I still want to remind everyone that you must be careful when assembling large-scale technology SETs, otherwise you must wait until you find errors and then rework, which may cause a huge workload.

Assembly process

Assembling starts from the internal structure of the front wheel, first assembling the suspension system of the front wheel and the winch mechanism. I haven’t assembled CaDA blocks for a long time. When I tried it again this time, I suddenly found that the internal parts used a variety of different colors. It was much easier to find a piece when assembling, which is worthy of praise.

It is then equipped with a linkage 8-cylinder engine.

The internal structure of the rear wheel is similar to that of the front wheel, and both include a shift mechanism and independent suspension of the tires on both sides.

Between the front and rear modules is a very long drive shaft, which needs to withstand greater torque and looks relatively thin. However, after the peripheral structure is put together, it is much more practical, and the chassis of the car is basically formed at this time.

In the middle of the front and rear modules is a very complicated gear switching mechanism. In addition to connecting the front and rear modules, it also integrates the driving mechanism of the roof artillery. The gear shift is extended to the outside of the trunk of the parking space through the universal joint, which is convenient for operation.

After the internal structure is completed, the modular outer panel will be assembled. The above is the hood.

The trunk lid.

One side door.

Two sets of replaceable weapons on the roof.

Although a small amount of bricks are used to make the appearance, the structure of each module is very stable. After being connected together, it is mounted on the car chassis as a whole.

The car shell is connected to the chassis with a pin at the bottom, which is very easy to disassemble and assemble.

Such a semi-finished product looks a bit cyberpunk style.

After putting on the hood, you’re done. The size of the finished product is 52.6 in length, 24.5 in width and 21.2 in height, which is huge!

This car integrates various functions together through the transfer case in the middle. Rotate the knob of the parking space to switch between 4 gears, which is easy to understand. The last very detailed official description is for everyone.

It is also worth mentioning that the power module almost does not need to be disassembled and installed directly on the static version to upgrade to the dynamic version. If the budget is insufficient, there is no need to worry about a large amount of rework after entering the dynamic version.

Product display

Summarize

The internal structure adopts a mixed-color design, which makes it very easy to assemble and find a piece;

The manual is detailed enough to effectively reduce the chance of stepping on thunder during the assembling process;

Modular design, structure and power unit are very easy to disassemble and assemble;

Many movable functions, strong playability;

Is the assembly bigger, waiting for you to challenge it.