In 2021, the engineering series of Mould King will be released one after another, which is nicknamed the year of engineering.

Engineering series products can be seen in our lives, on the road, on the construction site, and in the farmland.

So how many new engineering products have Mould King released in 2021?

Mould King 17001 Crawler crane

Cranes are the most common construction machinery. They are suitable for hoisting operations on construction sites. They are flexible in operation, easy to use, and have a large lifting capacity. After replacing working devices, they can become excavators or Pile driver

The set is composed of the power unit, working mechanism, boom, turntable, chassis, etc., it simulates a single-person cab, and the boom is equipped with a hook at the front end。

Mould King 17003 All-terrain piling platform

GOBRICKS parts, 2 modes, you can play the crane in mode A, and the pile driver in mode B

The front of the car can be swung. Carbon fiber cross shaft, metal sling. Dual remote control mode (remote control and app)。

Mould King 17005 Tractor

Mould King 17006 Bucket wheel excavator

The body adopts a crawler walking type. In mud, snow or places with harsh terrain conditions, crawler vehicles have advantages over wheeled vehicles

The crawler increases the contact area between the bottom and the ground, thereby reducing the pressure on the ground, so that the mechanical energy can work very smoothly on the ground without sinking.

Although the body is large, it can be flexibly rotated at all angles, and the arm can be retracted freely

A giant bucket wheel is installed in the front of the fuselage, equipped with eight buckets, the bucket wheels are used to continuously take materials, and the belt conveyor on the machine is used to continuously push the materials.

Mould King 17011 Tow Truck

There are two towing methods for specifically handling malfunctioning vehicles. One is to fix the tires of the vehicle and lift the front or rear wheels and tow away. The second is to use the suspension type to put the car directly on the trailer。

The overall body adopts a yellow color scheme, a long nose American truck front, a trailing arm and a hook at the rear, a total of eight tires in the front, two and the rear, and the appearance of domineering side leakage, all of which show its sense of strength.

The front of the car is equipped with a rotary switch to control the left and right steering of the wheels. The switch on the left side of the front can control the lifting of the tail of the trailer.

The switch near the front of the robot arm can control the lifting rope hook to lift freely. The top switch of the robotic arm can control the expansion and contraction of the push rod, and the big nose can be opened and closed manually。

Mould King 17012 Three-way dump truck

Mould King 17012 Three-way dump truck，The front and cargo boxes are in golden color and are equipped with red and white warning signs. With the smooth shape and the hollowed-out front face, the front two driving wheels, and eight load-carrying wheels behind, the whole car feels full of power.

Most of the dump trucks you have seen are forward lift, a small number of rollovers, and two-way rollovers, and there should be very few three-way dump trucks that support back, left, and right flips.

With diversified unloading methods, you can unload the truck from any direction without having to adjust the car’s position.

In order to make the dump truck more realistic, the front of the car can be turned over when the real car is simulated, the doors on both sides can be opened and closed normally, and the two-speed transmission of the simulated engine linkage differential can be used.

Mould King 17013 Grove mobile crane

GOBRICKS parts, it is worth noting that there is a 6-channel battery in the lower right corner. This battery may allow Mould King to upgrade many of its previous products. The original 5 channels will use 2 batteries, and now can directly use one.

Grove excites many engineering fans, 15 putters, adjustable-speed battery and remote control, can also travel horizontally, plus fly boom.

Mould King 17013-H Grove mobile crane

Mould King 17022 Fire engine

The console can be rotated at multiple angles, which is convenient for rescue in narrow spaces.

Equipped with elevators and simulated hanging baskets for firefighters to ascend and fight.

Almost large vehicles will be equipped with an auxiliary hoe on both sides to avoid secondary damage caused by vehicle rollover.

Mould King 17023 Pneumatic two-end engineering vehicle

Two channels with fixed functions: 1. The cockpit can be reversed 2. The hoe can be retracted

Original transfer function, the gear linkage when the cockpit is forward: 1. Left crawler 2. Right crawler 3. Bulldozer boom 4. Bulldozer forearm

Original transfer function, linkage with gear when the cockpit is backward: 1. Excavator turntable 2. Excavator bucket (with clutch start switch)

Mould King 17024 D8K-Bulldozer

Mould King 17027 Fire rescue

The prototype is a road wrecker, also known as wrecker trailers, trailers, etc. It can quickly, promptly, and safely remove accidents, faults, and illegal vehicles on the road, occupying an important position in road rescue and rescue

Available in fire-fighting red and classic yellow colors, and five decorative warning lights on the top of the car

The set is a towed wrecker truck with a trailing arm that can adjust the angle up and down.

Both sides are equipped with front arms and rear arms, which can be opened during daily operations to avoid rollover caused by unstable center of gravity

Mould King 13122S Wheel reprint-bulldozer blocks

Mould King 19001 Pneumatic service truck

This pneumatic maintenance trailer uses 3 motors to achieve driving, steering, and up to 4 sets of functional linkages.

Counting the two pneumatic controls, there are actually as many as 5 sets of functional linkages. If you are more interested in aerodynamics, this repair trailer should indeed be a good choice.

Mould King 19004 Pneumatic airport rescue vehicle

Features include:

● 8 sets of large-capacity water storage tank design, play more durable

● The roof battery cover can be opened

● The nozzle can be rotated

● Adjustable spray arm angle

● Car body wing door design

● The door can be opened and closed

● The rear equipment compartment door can be opened and closed

● The water storage door on the side of the car body can be opened and closed

Mould King’s first sprayable design engineering device, 8 water storage tanks, according to the excellent capabilities of the previous Mould King’s pneumatic accessories, the water pressure of the water gun may be good.

Mould King 19005 Pneumatic tractor

Mould King 19005T Pneumatic pallet truck

Mould King 19006 Pneumatic forest machine

The logging truck can be described as large-scale equipment, loaded with powerful logging tools, which can cut off the branches of the tree and cut the tree body into a neat shape.

The main body color is forest green, with a white robotic arm.

The simulation cab is hollowed out, with a total of eight tires in the front four and the rear four.

The artificial gripper of the mechanical arm is designed as a pneumatic drive system. When the hood is opened, the pumping device can be seen, and the opening and closing angle of the gripper can be manually adjusted.

The boom can lift and rotate freely, the cab can be rotated 360 degrees, and the doors on both sides can be opened and closed normally.

Mould King 19008 Tow Truck (Ultimate Edition)

The set adopts the classic red and black color body. The design of the front is flat, and the roof comes with five spotlights (for decoration only)

Wrecker truck front air pressure, with air pressure switch, left and right battery doors can be opened and closed, left and right, rear, four auxiliary hoes can be raised and lowered.

The boom can be rotated 180 degrees, raised and lowered, and retracted, and the carriage and trailer tail can be adjusted and raised remotely.

The front four wheels can be turned by remote control to realize functions such as steering and U-turn of the wrecker

Mould King 19009 Pneumatic telescopic forklift

Use power aerodynamics to control the building block car, let you feel the charm of machinery and technology.

Although the building block forklift is small, the so-called sparrow is small, complete with all internal organs, and replicates the operating functions of the real car.

Equipped with an air pump device to drive the piston to pump air and convert the air into pressure energy to make the forklift work!

Many parts of the vehicle are controllable, the robot arm can be adjusted to rise and fall, and the fork can be controlled flexibly to increase the playability of building blocks.